upper left corner horizontal top upper right corner
vertical left
Solidscape ModelMaker II
 spacer
vertical right
spacer Contact UsSite MapTell an AssociateIndustry LinksHome
 spacer
lower left corner top transition horizontal bottom lower right corner
spacer bottom transition spacer
When Precision Counts.
bottom vertical left Company
Products
Events
Business Partners
Customer Service
Case Studies
VAR Portal

3D Models

bottom vertical right
bottom horizontal bottom
Technical Documentation

Precision
ACHIEVABLE ACCURACY: Ring inscriptions

  • Build layer: 0.0005 in. (0.013 mm) to 0.003 in. (0.076 mm)
  • Surface finish: 32-63 micro-inches (RMS)
  • Minimum feature size: 0.010 in. (0.254 mm)
  • Size of micro-droplet: 0.003 in. (0.076 mm)
  • Plotter carriage calibration: automatic, before each build cycle
  • Build envelope: X = 12 in. (30.48 cm), Y = 6 in. (15.24 cm),
    Z = 8.5 in. (21.59 cm)
Note: The accuracy of the ModelMaker II enables larger parts to be built in segments.

Efficiency

  • Plotter carriage speed: up to 20 in. (50 cm) per second at rated travel speed
  • Unattended operation
  • Material refill during operation
  • Automatic fault detection and status monitoring
  • Re-start of build from point of interruption
Ring set

ModelMaker II™ System

  • Small footprint: 34 in. (88.9 cm) width x 26 in. (66 cm) depth
  • Power requirements: 115v 60Hz AC or 230v 50Hz AC
  • CE certified; FCC Class A approved
  • Ambient operating temperature: 60° to 80° F (16° to 27° C)

ModelWorks™ Software

  • Multiple slice thicknesses supported in a single build
  • Operates with standard IBM-compatible PC running Microsoft Windows 95/98 or NT 4.0)
  • CAD file input: .STL, .SLC, .DXF, .OBJ, .HPP (HPGL)

ProtoBuild™ Material

  • Composition: thermoplastic
  • Melting point: 194° - 235° F (90° - 113° C)
  • Co-efficient of thermal expansion (CTE): negligible
  • Residue after autoclave process: none
  • No shrinkage, distortion, disintegration at normal temperatures
  • Non-toxic
  • Supplier: Solidscape, Inc.

ProtoSupport™ Material

  • Composition: natural and synthetic waxes and fatty esters
  • Melting point: 129° - 169° F (54° - 76° C)
  • Soluble in BIOACT™ VSO bath at 122° - 158° F (50° - 70° C)
  • No post-dissolve dry or cure time
  • No post-dissolve finishing or touch up necessary
  • Non-toxic
  • Supplier: Solidscape, Inc.

Affordable
  INCLUDES:

  • ModelMaker II system
  • Cart with vacuum (North America only) and integral air conditioner
  • ModelWorks application software
  • Windows 3.1 and Windows 95 drivers
  • Starter kit of consumable materials
  • One-year warranty
  • All software updates for the first year
  • Installation (in USA) by Solidscape or Solidscape Reseller
  • Factory training for one operator
  • Technical hot-line support via toll-free number (in USA) and FTP site