upper left corner horizontal top upper right corner
vertical left
Solidscape T612 Benchtop
 spacer
vertical right
spacer Contact UsSite MapTell an AssociateIndustry LinksHome
 spacer
lower left corner top transition horizontal bottom lower right corner
spacer bottom transition spacer
When Precision Counts.
bottom vertical left Company
Products
Events
Business Partners
Customer Service
Case Studies
EuroVAT-Net

3D Models

bottom vertical right
bottom horizontal bottom
Technical Documentation

Precision
ACHIEVABLE ACCURACY: Impeller Blade

  • Build layer: 0.0005 in. (0.013 mm) to 0.003 in. (0.076 mm)
  • Surface finish: 32-63 micro-inches (RMS)
  • Minimum feature size: 0.010 in. (0.254 mm)
  • Size of micro-droplet: 0.003 in. (0.076 mm)
  • Plotter carriage calibration: automatic, before each build cycle
  • Build envelope: X = 12 in. (30.48 cm), Y = 6 in. (15.24 cm),
    Z = 6 in. (15.24 cm)

Efficiency

  • Plotter carriage speed: up to 20 in. (50 cm) per second at rated travel speed
  • Unattended operation
  • Material refill during operation
  • Automatic fault detection and status monitoring
  • Re-start of build from point of interruption
Hip Stem

T612 Benchtop System

  • Footprint: 28.0 inches (71.12 cm) width x 19.5 inches (49.53 cm) depth x 19.5 inches (49.53 cm) height
  • Power requirements: 115v AC or 230v AC
  • CE certified; FCC Class A approved, UL
  • Ambient operating temperature: 60° to 80° F (16° to 27° C)

ModelWorks™ Software

  • Multiple slice thicknesses supported in a single build
  • Operates with standard IBM-compatible PC running Microsoft Windows 2000 Professional, XP Professional or ME
  • CAD file input: .STL, .SLC

InduraCast Material

  • Composition: thermoplastic
  • Melting point: 203° - 230° F (95° - 110° C)
  • Co-efficient of thermal expansion (CTE): negligible
  • Residue after autoclave process: none
  • No shrinkage, distortion, disintegration at normal temperatures
  • Non-toxic
  • Supplier: Solidscape, Inc.

InduraFill Material

  • Composition: natural and synthetic waxes and fatty esters
  • Melting point: 120° - 158° F (49° - 70° C)
  • Soluble in a mineral oil bath at 140° - 150° F (60° - 65° C)
  • No post-dissolve dry or cure time
  • No post-dissolve finishing or touch up necessary
  • Non-toxic
  • Supplier: Solidscape, Inc.

Affordable
  INCLUDES:

  • T612 Benchtop system
  • ModelWorks application software
  • Starter kit of consumable materials
  • All software updates for the first year
  • Installation (in USA) by Solidscape or Solidscape Reseller
  • Technical hot-line support via toll-free number (in USA) and FTP site