upper left corner horizontal top upper right corner
vertical left
Solidscape T76
 spacer
vertical right
spacer Contact UsSite MapTell an AssociateIndustry LinksHome
 spacer
lower left corner top transition horizontal bottom lower right corner
spacer bottom transition spacer
When Precision Counts.
bottom vertical left Company
Products
Events
Business Partners
Customer Service
Case Studies
EuroVAT-Net

3D Models

bottom vertical right
bottom horizontal bottom
Technical Documentation

T76 Precision
ACHIEVABLE ACCURACY:

  • Build layer: 0.0005 in. (0.013 mm) to 0.003 in. (0.076 mm)
  • Surface finish: 32-63 micro-inches (RMS)
  • Minimum feature size: 0.010 in. (0.254 mm)
  • Size of micro-droplet: 0.003 in. (0.076 mm)
  • Plotter carriage calibration: automatic, before each build cycle
  • Build envelope: X = 6 in. (15.24 cm), Y = 6 in. (15.24 cm),
    Z = 4 in. (10.16 cm)

Efficiency

  • Plotter carriage speed: up to 20 in. (50 cm) per second at rated travel speed
  • Unattended operation
  • Material refill during operation
  • Automatic fault detection and status monitoring
  • Re-start of build from point of interruption
Jewelry

T76 System

  • Small footprint: 21.60 inches (54.86 cm) width x 19.26 inches (48.92 cm) depth x 16.05 inches (40.77 cm) height
  • Power requirements: 115v 60 Hz AC with dedicated 20 ampere circuit or 230v 50 Hz AC with a dedicated 19 Ampere circuit
  • CE certified; FCC Class A approved TUV approved (EN60950 Compliant); RoHS Compliant
  • Ambient operating temperature: 60° to 80° F (16° to 27° C) at a 40% to 60% range of humidity

ModelWorks™ Software

  • Multiple slice thicknesses supported in a single build
  • Operates with standard PC running Microsoft Windows 2000 Professional, XP Professional or Windows Vista Business
  • CAD file input: .STL, .SLC

Teeth InduraCast™ Material

  • Composition: thermoplastic
  • Melting point: 203° - 230° F (95° - 110° C)
  • Co-efficient of thermal expansion (CTE): negligible
  • Residue after autoclave process: none
  • No shrinkage, distortion, disintegration at normal temperatures
  • Non-toxic
  • Supplier: Solidscape, Inc.

InduraFill™ Material

  • Composition: natural and synthetic waxes and fatty esters
  • Melting point: 120° - 158° F (49° - 70° C)
  • Soluble in a mineral oil bath at 140° - 150° F (60° - 65° C)
  • No post-dissolve dry or cure time
  • No post-dissolve finishing or touch up necessary
  • Non-toxic
  • Supplier: Solidscape, Inc.

Affordable
  INCLUDES:

  • T76 system
  • ModelWorks application software
  • Starter kit of consumable materials
  • All software updates for the first year
  • Factory/On Site training for one operator
  • Technical hot-line support via toll-free number (in USA)